變速箱緩沖片的學術名稱為碟形彈簧鋼片。由于變速箱國產化后緩沖片設計強度不足，材料輕度不夠。導致后期使用松動，導致變速箱倒擋、三擋、五擋的高速擋離合器磨損嚴重，磨損的真正原因則是緩沖片導致的。那么變速箱緩沖片壞了什么癥狀？
濟南自動變速箱維修人員給您簡單分析分析。
The academic name of gearbox buffer plate is dished spring steel plate. Due to the insufficient design strength of the buffer plate after the localization of the gearbox, the material is slightly insufficient. As a result, the later use is loose, causing serious wear of the high speed clutch of the reverse gear, third gear and fifth gear of the transmission. The real cause of wear is the buffer plate. Then what is the symptom of the gearbox buffer broken? Jinan automatic transmission maintenance personnel will give you a simple analysis.
1、汽車掛擋打滑。起步沒有力，加速跑不動。
1. The car skids in gear. There is no strength in starting, and I can't run at a faster speed.
2、變速箱異響。行駛中變速箱內部有噠噠咔咔異響聲。
2. The gearbox makes abnormal noise. There is a rattling noise inside the transmission during driving.
3、掛入擋位發動機熄火。或入檔維、變擋、行駛中有沖擊的現象。
3. Put the engine into gear and stop the engine. Or there is impact during shifting, shifting and driving.
自動變速箱緩沖片的作用是緩沖和減震，使駕駛更加舒適，還可減輕長途駕駛后的疲勞感，多用于自動擋汽車上。
The function of the buffer plate of the automatic transmission is to cushion and shock absorption, so as to make driving more comfortable. It can also reduce the fatigue after long distance driving. It is mainly used on automatic transmission vehicles.
自動變速箱掛倒擋，不加油門不走，一加油門起步沖擊大。這樣的故障很可能是變速箱故障造成的。八成是內部的緩沖片損壞造成的。需要換改進的緩沖片，損壞的鋁鼓，重新組裝好變速箱才能解決問題。
When the automatic transmission is in reverse gear, it will not move without the fuel valve, and the starting impact of one fuel valve is great. Such failure is likely to be caused by transmission failure. It is probably caused by the damage of the internal buffer plate. It is necessary to replace the improved buffer plate, damaged aluminum drum and reassemble the gearbox to solve the problem.
緩沖片損壞是變速箱通病。損壞的緩沖片會斷成這樣的好多段主要是緩沖片材質不好，車開一定公里數容易斷。換改進的，材質好的緩沖片就能減少再次出現緩沖片損壞的可能。
Damaged buffer is a common fault of the transmission. The damaged buffer will break into many sections, mainly due to the poor material of the buffer, which is easy to break after driving for a certain mileage. Replace it with an improved one, and a good buffer can reduce the possibility of damage to the buffer again.
Every module of the gearbox has a fault. Make sure to repair it like this. If you don't understand, you can ask. We may help determine the fault and reduce the maintenance cost. More relevant content will come to our website http://m.566605.com Consult and understand!
